Python control structures

Last updated on 2023-05-04 | Edit this page

Estimated time: 45 minutes

Overview

Questions

What constructs are available for changing the flow of a program?
How can I repeat an action many times?
How can I perform the same task(s) on a set of items?

Objectives

Change program flow using available language constructs
Demonstrate how to execute a section of code a fixed number of times
Demonstrate how to conditionally execute a section of code
Demonstrate how to execute a section of code on a list of items

Programs are rarely linear

Most programs do not work by executing a simple sequential set of statements. The code is constructed so that decisions and different paths through the program can be taken based on changes in variable values.

To make this possible all programming language have a set of control structures which allow this to happen.

In this episode we are going to look at how we can create loops and branches in our Python code. Specifically we will look at three control structures, namely:

if..else..
while…
for …

The `if` statement and variants

The simple if statement allows the program to branch based on the evaluation of an expression

The basic format of the if statement is:

PYTHON

if expression :
    statement 1
    statement 2
    ...
    statement n

statement always executed

If the expression evaluates to True then the statements 1 to n will be executed followed by statement always executed . If the expression is False, only statement always executed is executed. Python knows which lines of code are related to the if statement by the indentation, no extra syntax is necessary.

Below are some examples:

PYTHON

print("\nExample 1\n")

value = 5
threshold= 4
print("value is", value, "threshold is ",threshold)
if value > threshold :
    print(value, "is bigger than ", threshold)

print("\nExample 2\n")


high_threshold = 6
print("value is", value, "new threshold is ",high_threshold)
if value > high_threshold :
    print(value , "is above ", high_threshold, "threshold")

print("\nExample 3\n")


mid_threshold = 5
print("value is", value, "final threshold is ",mid_threshold)
if value == mid_threshold :
    print("value, ", value, " and threshold,", mid_threshold, ", are equal")

OUTPUT

Example 1

value is 5 threshold is 4
5 is bigger than 4

Example 2

value is 5 new threshold is 6

Example 3

value is 5 final threshold is 5
value, 5, and threshold, 5, are equal

In the examples above there are three things to notice:

The colon : at the end of the if line. Leaving this out is a common error.
The indentation of the print statement. If you remembered the : on the line before, Jupyter (or any other Python IDE) will automatically do the indentation for you. All of the statements indented at this level are considered to be part of the if statement. This is a feature fairly unique to Python, that it cares about the indentation. If there is too much, or too little indentation, you will get an error.
The if statement is ended by removing the indent. There is no explicit end to the if statement as there is in many other programming languages

In the last example, notice that in Python the operator used to check equality is ==.

Exercise

Add another if statement to example 2 that will check if b is greater than or equal to a

Show me the solution

PYTHON

print("\nExample 2a\n")

a= 3
b= 4
print("a is", a, "b is",b)
if a > b :
    print(a, "is bigger than ", b)
if a <= b :
    print(b, "is bigger than or equal to ", a)

Instead of using two separate if statements to decide which is larger we can use the if ... else ... construct

PYTHON

# if ... else ...

value = 4
threshold = 5
print("value = ", value, "and threshold = ", threshold)

if value > threshold :
    print("above threshold")
else :
    print("below threshold")

OUTPUT

value = 4 and threshold = 5
below threshold

Exercise

Repeat above with different operators ‘<’ , ‘==’

A further extension of the if statement is the if ... elif ...else version.

The example below allows you to be more specific about the comparison of a and b.

PYTHON

# if ... elif ... else ... endIf

a = 5
b = 4
print("a = ", a, "and b = ", b)

if a > b :
    print(a, " is greater than ", b)
elif a == b :
    print(a, " equals ", b)
else :
    print(a, " is less than ", b)

OUTPUT

a = 5 and b = 4
5 is greater than 4

The overall structure is similar to the if ... else statement. There are three additional things to notice:

Each elif clause has its own test expression.
You can have as many elif clauses as you need
Execution of the whole statement stops after an elif expression is found to be True. Therefore the ordering of the elif clause can be significant.

The `while` loop

The while loop is used to repeatedly execute lines of code until some condition becomes False.

For the loop to terminate, there has to be something in the code which will potentially change the condition.

PYTHON

# while loop
n = 10
cur_sum = 0
# sum of n  numbers
i = 1
while  i <= n :
    cur_sum = cur_sum + i
    i = i + 1
print("The sum of the numbers from 1 to", n, "is ", cur_sum)

OUTPUT

The sum of the numbers from 1 to 10 is 55

Points to note:

The condition clause (i <= n) in the while statement can be anything which when evaluated would return a Boolean value of either True of False. Initially i has been set to 1 (before the start of the loop) and therefore the condition is True.
The clause can be made more complex by use of parentheses and and and or operators amongst others
The statements after the while clause are only executed if the condition evaluates as True.
Within the statements after the while clause there should be something which potentially will make the condition evaluate as False next time around. If not the loop will never end.
In this case the last statement in the loop changes the value of i which is part of the condition clause, so hopefully the loop will end.
We called our variable cur_sum and not sum because sum is a builtin function (try typing it in, notice the editor changes it to green). If we define sum = 0 now we can’t use the function sum in this Python session.

Exercise - Things that can go wrong with while loops

In the examples below, without running them try to decide why we will not get the required answer. Run each, one at a time, and then correct them. Remember that when the input next to a notebook cell is [*] your Python interpreter is still working.

PYTHON

# while loop - summing the numbers 1 to 10
n = 10
cur_sum = 0
# sum of n  numbers
i = 0
while  i <= n :
    i = i + 1
    cur_sum = cur_sum + i
    
print("The sum of the numbers from 1 to", n, "is ", cur_sum)

PYTHON

# while loop - summing the numbers 1 to 10
n = 10
cur_sum = 0
boolvalue = False
# sum of n  numbers
i = 0
while  i <= n and boolvalue:
    cur_sum = cur_sum + i
    i = i + 1
    
print("The sum of the numbers from 1 to", n, "is ", cur_sum)

PYTHON

# while loop - summing the numbers 1 to 10
n = 10
cur_sum = 0
# sum of n  numbers
i = 0
while  i != n :
    cur_sum = cur_sum + i
    i = i + 1

print("The sum of the numbers from 1 to", n, "is ", cur_sum)

PYTHON

# while loop - summing the numbers 1.1 to 9.9 i. steps of 1.1
n = 9.9
cur_sum = 0
# sum of n  numbers
i = 0
while  i != n :
    cur_sum = cur_sum + i
    i = i + 1.1
    print(i)
    
print("The sum of the numbers from 1.1 to", n, "is ", sum)

Show me the solution

Because i is incremented before the sum, you are summing 1 to 11.
The Boolean value is set to False the loop will never be executed.
When i does equal 10 the expression is False and the loop does not execute so we have only summed 1 to 9
Because you cannot guarantee the internal representation of Float, you should never try to compare them for equality. In this particular case the i never ‘equals’ n and so the loop never ends. - If you did try running this, you can stop it using Ctrl+c in a terminal or going to the kernel menu of a notebook and choosing interrupt.

The `for` loop

The for loop, like the while loop repeatedly executes a set of statements. The difference is that in the for loop we know in at the outset how often the statements in the loop will be executed. We don’t have to rely on a variable being changed within the looping statements.

The basic format of the for statement is

PYTHON

for variable_name in some_sequence :
    statement1
    statement2
    ...
    statementn

The key part of this is the some_sequence. The phrase used in the documentation is that it must be ‘iterable’. That means, you can count through the sequence, starting at the beginning and stopping at the end.

There are many examples of things which are iterable some of which we have already come across.

Lists are iterable - they don’t have to contain numbers, you iterate over the elements in the list.
The range() function
The characters in a string

PYTHON

print("\nExample 1\n")
for i in [1,2,3] :
    print(i)

print("\nExample 2\n")
for name in ["Tom", "Dick", "Harry"] :
    print(name)

print("\nExample 3\n")
for name in ["Tom", 42, 3.142] :
    print(name)

print("\nExample 4\n")
for i in range(3) :
    print(i)

print("\nExample 5\n")
for i in range(1,4) :
    print(i)

print("\nExample 6\n")
for i in range(2, 11, 2) :
    print(i)

print("\nExample 7\n")
for i in "ABCDE" :
    print(i)

print("\nExample 8\n")
longString = "The quick brown fox jumped over the lazy sleeping dog"
for word in longString.split() :
    print(word)

OUTPUT

Example 1

1
2
3

Example 2

Tom
Dick
Harry

Example 3

Tom
42
3.142

Example 4

0
1
2

Example 5

1
2
3

Example 6

2
4
6
8
10

Example 7

A
B
C
D
E

Example 8

The
quick
brown
fox
jumped
over
the
lazy
sleeping
dog

Exercise

Suppose that we have a string containing a set of 4 different types of values separated by , like this:

PYTHON

variablelist = "01/01/2010,34.5,Yellow,True"

Research the split() method and then rewrite example 8 from the for loop section above so that it prints the 4 components of variablelist

Show me the solution

PYTHON

# From the for loop section above
variablelist = "01/01/2010,34.5,Yellow,True"
for word in variablelist.split(",") :
    print(word)

The format of variablelist is very much like that of a record in a csv file. In later episodes we will see how we can extract these values and assign them to variables for further processing rather than printing them out.

Key Points

Most programs will require ‘Loops’ and ‘Branching’ constructs.
The if, elif, else statements allow for branching in code.
The for and while statements allow for looping through sections of code
The programmer must provide a condition to end a while loop.

Python control structures

Overview

Questions

Objectives

Programs are rarely linear

The if statement and variants

PYTHON

PYTHON

OUTPUT

Exercise

Show me the solution

PYTHON

PYTHON

OUTPUT

Exercise

PYTHON

OUTPUT

The while loop

PYTHON

OUTPUT

Exercise - Things that can go wrong with while loops

PYTHON

PYTHON

PYTHON

PYTHON

Show me the solution

The for loop

PYTHON

PYTHON

OUTPUT

Exercise

PYTHON

Show me the solution

PYTHON

Key Points

The `if` statement and variants

The `while` loop

The `for` loop